Aluminium Walkways

Aluminium walkway systems comply with the following standards:

B.S. 6399: part 1: 1996.

Testing/Inspection standards and frequency:

The Provision and Use of Work Equipment Regulations (P.U.W.E.R) 1998 – minimum of every 12 months by a working at height specialist company

Aluminium walkways gives safe access for general cleaning and maintenance purposes. This solution can be used as a collective measure with handrails and optional toe boards which guards hazard and is the preferred method should working at height be unavoidable.

This product can also be used in conjunction with a cable or track system in restraint or fall arrest.

Aluminium walkway can be fitted to all roof surface types and can be designed to incorporate steps and ladders to provide a full access system.

The system is lightweight and approximately one third of the weight of steel panels, also extremely strong and robust.

The non-slip tread design – provides all weather access and can either anodised or paint powder coat finished.  These systems must be inspected by a suitable working at height Specialist Company a minimum of every 12 months.

Aluminium walkway systems can be permanently fixed to any good quality structure which is capable of withstanding the additional loading exerted by the system.

These systems can also be suspended either directly or by means of secondary steelwork. Aluminium walkway is also available in a stepped format to allow access to inclined roofing areas, and also as a step over to traverse obstacles.

Traversing a pitched roof is also covered with the inclusion of a levelling system, providing a level and safe access route in any area.

Aluminium walkway systems are also known as:

Aluminium roof access walkways, roof protection

These systems are commonly installed in the following sectors:

Residential
Industrial
Offices
Retail
Hotels / Leisure
Education
Healthcare
Utilities

Aluminium walkway systems can either be anodised or paint powder coat finished.